We track the Queen medium-firm VALEVÅG pocket-spring mattress only.
Pick one or more traits above and we will show the strengths and watch-outs that matter for this mattress.
Buy the IKEA Valevag if you want a very low-cost, responsive spring mattress and can test the specific firmness before buying. Skip it if you are a pressure-sensitive side sleeper, need more dependable daily support, rely on strong edge support, or want a refund-style sleep trial.
Pressure mapping showed side-sleeper mean/peak pressure 0.0196–0.0204/1.98–2.06 PSI, back 0.118–0.122/1.15–1.19 PSI, and stomach 0.127–0.133/1.09–1.13 PSI. Sinkage measured 1.68–1.74 inches, while the comfort layer measured about 2.0 inches on the 9.5-inch mattress. The high peak pressure and shallow cushioning help explain repeated shoulder, hip, and too-firm complaints.
Repeated readings can vary by about 2%, so we report the full measured range instead of a single value.
| Position | Sustained pressure after the tester settles. The range shows the small variation across repeated readings. | The brief highest pressure at first contact. The range shows the small variation across repeated readings. |
|---|---|---|
| Side | 0.0196–0.0204 PSI | 1.98–2.06 PSI |
| Back | 0.118–0.122 PSI | 1.15–1.19 PSI |
| Stomach | 0.127–0.133 PSI | 1.09–1.13 PSI |
These PSI ranges are measured values. Map colors show where pressure collected, not the PSI of each square.
Sinkage measured 1.68–1.74 inches. The five-zone pocket springs create a restrained support surface, but reports of sagging, back pain, hip sink, and excessive firmness make the result highly dependent on body and firmness choice.
Motion-transfer testing scored 7.9/10 with peak-to-peak acceleration 10.08–10.50 m/s^2. Sensitive partners may notice forceful position changes, although the pocketed coils isolate movement better than a linked innerspring.
A fixed 12 lb load creates the impact while an accelerometer records the movement that crosses the mattress.
Cooling testing scored 7.0/10, while sinkage measured 1.68–1.74 inches. The pocket-spring core moves air more freely than solid foam, but the polyurethane comfort layer and ordinary cover do not make Valevag a specialist cooling mattress.
Edge-support testing scored 7.3/10, sitting compression measured 4.61–4.79 inches, and lying edge support was Fair. The reinforced perimeter helps, but sagging and edge- or middle-sink complaints make full-width support less dependable over time.
We measure seated compression, then check how secure the surface remains while lying directly along the edge.
The surface mostly recovered in 0.206–0.214 seconds and fully recovered in 0.67–0.69 seconds. Bounce measured 10.09–10.51 inches, making movement a clear strength.
The pocket-spring core provides structure, but the thin comfort package and repeated owner reports of sagging or support loss lower long-term confidence.
The score uses the policy terms shown in the Fine Print Check below. Models governed by the same terms use the same policy inputs.
IKEA says 5 comfort zones support hips and shoulders for natural spine alignment.
Mixed. The zone feature is real, but pressure-relief testing and owner complaints show the mattress is not a strong pressure-relief pick.
Side sleepers and pressure-sensitive sleepers should try the specific firmness before relying on the zone claim.
IKEA says pocket springs respond independently and reduce motion transfer.
Partly supported. Motion control is acceptable for the price, but measured transfer and high bounce keep it from feeling especially calm.
Reasonable for budget couples, not ideal for very motion-sensitive partners.
IKEA says reinforced edges let you sit or sleep close to the edge without sliding off.
Mixed. The construction feature exists, and overall edge performance is good, but sitting compression and fair lying-edge support keep it from being a standout.
Compare stronger hybrids if edge support is a top need.
IKEA promotes a 90-day mattress exchange if you do not love it.
Accurate, but it is a one-time exchange, condition-limited, and not the same as a long refund trial.
Policy-sensitive shoppers should understand the exchange mechanics before buying.
Positive owners like the low price, firm feel, easy transport, guest-room usefulness, and support when the specific firmness matches their body.
Complaints cluster around shoulder pain, lower-back pain, sagging, softening, firmness mismatch, size/frame fit, and frustration with exchange or warranty outcomes.
Reddit owner discussionsOwner feedback is broad and mostly cautionary. Some sleepers like the supportive, bouncy, lower-cost spring feel. Negative reports are more common and focus on side-sleeper pain, back pain, middle sagging, firmness surprise, and the practical limits of IKEA's exchange policy.
IKEA customer feedback includes value and support praise alongside serious complaints about sagging, back pain, firmness mismatch, size gaps, warranty friction, and refund-card frustration. The mattress comes with a one-time 90-day exchange and 10-year limited warranty.
Owner feedback is broad and mostly cautionary. Some sleepers like the supportive, bouncy, lower-cost spring feel. Negative reports are more common and focus on side-sleeper pain, back pain, middle sagging, firmness surprise, and the practical limits of IKEA's exchange policy.
Negative support thread from an owner who found the firmer option uncomfortable after several months.
Early lower-back sink report that frames the support-risk concern around the extra-firm version.
Multi-owner thread with firmness comparison, shoulder pain, and exchange context.
Side-sleeper report showing how showroom firmness can fail at home after a full night.
Negative queen-size sagging report after a couple months, aligned with support-durability caution.
Value and sagging question thread that captures the main buyer uncertainty around Valevag.
Comparison thread showing why Valevag can feel supportive and bouncy but still raise neck or pressure concerns.
Includes a Valevag owner report about softening, edge flattening, and lower-back discomfort after about 30 days.
IKEA customer feedback includes value and support praise alongside serious complaints about sagging, back pain, firmness mismatch, size gaps, warranty friction, and refund-card frustration. The mattress comes with a one-time 90-day exchange and 10-year limited warranty.
Valevag sizes, pocket-spring construction, materials, price, and customer reviews.
IKEA's one-time 90-day mattress exchange and Refund Card mechanics.
Exchange conditions, adjustment guidance, and delivery logistics.
The 10-year limited mattress warranty, proof-of-purchase requirement, and coverage limits.
IKEA allows one mattress exchange within 90 days if the mattress is not dirty, marked, or damaged.
This is less flexible than a cash-refund sleep trial.
IKEA says a new mattress can seem too firm initially and recommends at least one month for the mattress and body to adjust.
Shoppers should not expect a very quick cash-refund path if the feel is wrong.
IKEA says collection and delivery of the replacement mattress will be free of charge if the original mattress was delivered via Home Delivery Service.
Buyers who self-transport may have a more hands-on exchange process.
IKEA mattresses carry a 10-year limited warranty against defects in material and workmanship, with proof of purchase required.
Warranty coverage is for defects, not routine comfort mismatch after the exchange window.
Model checkedJul 8, 2026Current model
Configuration testedCurrent model lineup · Medium firm, Firm, Extra firm
Quilted stretch coverRecycled polyester ticking with viscose/polyester filling · Top
0.75 inches in the tested mattressSoft quilted cover with added wadding for initial cushioning. This quilted surface supplies the first stage of cushioning before the sleeper reaches the foam or spring layers below, while its fibers can also influence moisture and surface airflow.
Why it matters: Across the IKEA Valevag Mattress, pressure relief was assessed at 5/10 (Weak). A thicker quilt can soften initial contact, but deeper pressure relief and alignment still depend on the complete comfort and support stack.
Standard foam comfort layerPolyurethane foam 1.5 lb/cu.ft. · Comfort
1.25 inches in the tested mattressThin foam comfort layer over the spring unit. This foam distributes load through the comfort stack. Its position, thickness, and firmness matter more than a gel infusion or branded name alone when judging contour and support.
Why it matters: For the IKEA Valevag Mattress as a whole, pressure relief was assessed at 5/10 (Weak). Near the surface it contributes more cushioning; deeper in the mattress it primarily moderates the transition into the support core.
Stiff feltStiff felt · Transition
Helps maintain structure between comfort materials and springs. This layer buffers the sleeper from the firmer support core and controls how gradually resistance increases as the body sinks deeper.
Why it matters: In the finished IKEA Valevag Mattress, firm and Extra firm options can help shoppers who dislike plush beds. It becomes especially important for higher-weight sleepers and back or stomach sleepers, who engage more of the mattress depth than lighter sleepers.
Pocket spring unitSteel pocket springs · Support
7 inches in the tested mattressIndependently moving springs for bounce, support, and motion separation. This is the mattress’s main load-bearing spring unit. Pocketed coils, when used here, compress more locally than connected springs while leaving open space for airflow and rebound.
Why it matters: Across the IKEA Valevag Mattress, firm and Extra firm options can help shoppers who dislike plush beds. This layer supplies most of the deep pushback for alignment, but the foams or fibers above it still determine initial pressure relief and contour.
Reinforced edgeEdge-to-edge pocket spring support · Edge
IKEA says reinforced edges let sleepers sit or sleep close to the side without sliding off. This reinforcement is intended to resist perimeter compression, helping the outer sleeping surface remain usable when someone sits or lies near the side.
Why it matters: For the IKEA Valevag Mattress as a whole, IKEA says the mattress has reinforced edges. The meaningful check is the finished mattress’s seated compression and lying stability, not the presence of an edge-support label by itself.
IKEA low-price pocket spring with firmness choices: You want a very low-priced IKEA spring mattress and can test Medium firm, Firm, and Extra firm in store.
Choose if: You want the lowest-priced IKEA pocket spring option for a guest room, child, or short-term setup.
Watch out: It has an even thinner comfort layer and weaker pressure-relief confidence.
Read reviewChoose if: You want to stay in the IKEA lineup but compare a thicker spring mattress with more support architecture.
Watch out: It still follows IKEA's exchange-only terms and has its own firmness-fit cautions.
Read reviewChoose if: You want a more substantial hybrid with stronger all-around measured performance.
Watch out: It costs much more than Valevag and uses a different delivery/return model.
Read review